SECTION 4 - MACHINE OPERATION
3121783
4-29
4.10 SHUT DOWN AND PARK
WHEN PARKING THE MACHINE ON A SLOPE OR UNEVEN GROUND WITH THE
OUTRIGGERS RETRACTED, PARK WITH THE TRACKS IN THE FULLY WIDENED
POSITION AND BLOCK THE TRACKS USING WEDGES TO PREVENT MACHINE
MOVEMENTS.
1. Drive machine to a reasonably well protected area.
2. Ensure machine in the closed position.
3. Remove all load and allow engine to operate 3-5
minutes at LOW setting to permit reduction of
internal engine temperatures.
4. Shut down diesel/electric engine with the same
button on the platform remote control box used to
start it. Complete machine shut down takes
approximately 1 minute, LCD display OFF.
5. At ground and platform controls, push-in emer-
gency stop buttons, turn power switch to OFF and
remove key at the ground control station. Turn off
engine and remove the key.
6. If machine is to be shut down for long periods of
time, turn battery disconnect switch (
1
), RED han-
dle located on the electrical/battery tray housing,
to the POWER OFF position.
POWER ON
Clockwise
(As Shown)
POWER OFF
Counter-
Clockwise
BATTERY DISCONNECT SWITCH - DIESEL/AC-ELECTRIC
1702155A
1
OL00220
To
order
go
to
Discount-Equipment.com
