SECTION 4 - MACHINE OPERATION
4-16
3121783
Setting Outriggers From the Platform/Remote Console
(Reference Figure 4-6. on page 4-21 for item number location)
Either
- Press and hold the outrigger auto-
set and level button 7
(item 7)
until OK
appears on the platform LCD display;
or
Operate each outrigger separately by
pressing button 2
(item 2)
to select which
outrigger to control
(each outrigger is num-
bered 1 thru 4, see decal, each press of but-
ton 2 displays the outrigger selected on the
LCD display)
. Press button 7
(item 7)
to set
that outrigger. The OK will appear on the
display when the outriggers are set prop-
erly and the unit is level.
Note:
To cycle back to outrigger auto-set
mode, press button 2 (item 2) until the
LCD display shows the normal operating
icons.
CHECK BUBBLE LEVEL INDICATOR TO CONFIRM UNIT IS LEVEL (BUBBLE IS IN
THE 1° GREEN
(CENTER)
AREA) AND TRACKS ARE OFF THE GROUND BEFORE
OPERATING THE BOOM FUNCTIONS. IF BUBBLE IN THE LEVEL INDICATOR IS
NOT IN THE GREEN AREA, AFTER USING THE AUTO-LEVEL FUNCTION, SHUT
DOWN THE MACHINE AND HAVE THE MACHINE REPAIRED BY A QUALIFIED
SERVICE TECHNICIAN.
AUTO
7
MANUAL
SELECT
2
OL00600
To
order
go
to
Discount-Equipment.com
