JLG 1850SJ, Service And Maintenance Manual, Page: 287 / 712

SECTION 5 - BASIC HYDRAULIC INFORMATION & HYDRAULIC SCHEMATICS
3121619 5-35
Table 5-24. Metric Pipe Parallel O-Ring Boss (MPP)
TYPE/FITTING IDENTIFICATION
STUD ENDS
with 37° (JIC) or L series DIN (MBTL) opposite end
STUD ENDS
with (ORFS) or S series DIN (MBTS) opposite end
MA
TER
IAL
Thread
M Size
Connecting
Tube O.D.
Torque Torque
[Ft-Lb] [N-m] [Ft-Lb] [N-m]
(metric) (mm) Min Nom Max Min Nom Max Min Nom Max Min Nom Max
STEEL FIT
TINGS WITH
STEEL MA
TING C
O
MPO
NENT
S;
UN-L
U
B
RIC
ATED THREADS
M8 x 1 4 6 7 7 8 9 9 8 9 9 10 12 12
M10 x 1 6 11 12 12 15 16 16 15 16 17 20 22 23
M12 x 1.5 8 18 19 20 25 26 27 26 28 29 35 38 39
M14 x 1.5 10 26 28 29 35 38 39 33 35 36 45 47 49
M16 x 1.5 12 30 32 33 40 43 45 41 43 45 55 58 61
M18 x 1.5 15 33 35 36 45 47 49 52 55 57 70 75 77
M20 x 1.5 -- -- -- -- -- -- -- 59 62 65 80 84 88
M22 x 1.5 18 44 46 48 60 62 65 74 78 81 100 106 110
M27 x 2 22 74 78 81 100 106 110 125 132 138 170 179 187
M30 x 2 -- 95 100 105 130 136 142 175 184 193 237 249 262
M33 x 2 25 120 126 132 160 171 179 230 242 253 310 328 343
M38 x 2 -- 135 142 149 183 193 202 235 247 259 319 335 351
M42 x 2 30 155 163 171 210 221 232 245 258 270 330 350 366
M48 x 2 38 190 200 209 260 271 283 310 326 341 420 442 462
M60 x 2 50 230 242 253 315 328 343 370 389 407 500 527 552