PAGE 7 of 47
BG0104 Rev 03.3
3.
Tighten the dual pivot frame bar ratchet levers to lock the frame bars at the
required angle
(Fig. 17-2)
.
4.
Measurement increments
(Fig. 18)
on the frame bar are used to align the wheel
block with handles
(see “Wheel Block with Handle Positioning” on page 9)
.
4.4. Wheel Block with Handle
The wheel block with handle offers stability, braking and
mounting points for both cable management and the
spring-loaded encoder.
4.4.1. Wheel Block with Handle Orientation
Orientation and positioning of the wheel blocks with
handles on the dual pivot frame bar, is determined by
the diameter of the scan surface.
Fig. 18
- Measurement increments located at the ends of dual pivot frame bar
Fig. 19
- Wheel block with handle
Fig. 20
- Wheel block with handle, wheels facing outward, handle flush with frame bar
