PAGE 35 of 47
BG0104 Rev 03.3
10.
Adjust the height of the probe holders
(Fig. 100)
using the vertical adjustment knob
(see “Probe Holder Vertical Adjustment” on page 15).
6.3. Additional Set-up Information
The following steps may be required or helpful during certain scan situations.
6.3.1. Longitudinal probe holder adjustment
Scanning pipe diameters less than 30.5 cm
(12 in)
, longitudinal adjustment of the
probe holders may be required.
Fig. 101
- STIX system prepared for scanning
20 cm
(7.87 in)
Fig. 102
- Longitudinal probe holder adjustment
