PAGE 10 of 47
2.
Allow the sides of the frame bar to
lower 90°
(Fig. 26)
.
3.
Loosen the wheel block with handle
wing knob
(Fig. 23)
.
4.
Position the wheel block with handle
to the appropriate location
(Fig. 27)
on
the dual pivot frame bar.
5.
Repeat the previous steps with the
opposite wheel block with handle. Be
certain the positioning of each wheel
block with handle match.
4.4.4. Wheel Block with Handle Cable Management
Four mounting points for cable management are located on the wheel block
with handle
(see “Cable Management” on page 20)
.
Fig. 27
- Simple wheel block positioning
Fig. 28
- Wheel block set to innermost increment
Fig. 29
- Wheel block flush we end of frame bar
