Jetter AG
Identification and Configuration | 7
User Manual – JXM-IO-E30
35 / 70
Parameter
Description
Values
-S<Num>
SDO timeout
Default 300 ms
-L<name>
OS filename
e.g. JXM-IO-E30_Vx.xx.x.xx.os
Tab. 28:
JetEasyDownload Parameters
Performing the
update
JetEasyDownload -H100 -T48 -B5 -S8000 -LJXM-IO-E30_Vx.xx.x.xx.os
INFO
Selecting the CAN dongle
When selecting the CAN hardware, the –H100 parameter gives priority to the
hardware detected as connected to the PC. Ensure that the PEAK CAN dongle
is the only CAN device connected to the PC, to prevent the selection of the
wrong CAN dongle.
ü
JetEasyDownload and PEAK CAN dongle are ready for use.
ü
A CAN connection is open between the PEAK CAN dongle and the
JXM-IO-E30.
1.
Call up JetEasyDownload with the above parameters and a valid OS file.
ð
The device carries out a reset.
ð
The device starts in boot loader mode with a single heartbeat in init state
(data = 0x00).
2.
Wait for approx. 7 seconds while the device formats the flash memory.
ð
The device starts the download process.
ð
The device starts automatically with the new firmware.