Jetter AG
Identification and Configuration | 7
User Manual – JXM-IO-E30
34 / 70
7.2.1 Operating System Update of the Expansion Module
This chapter describes how to carry out an operating system update on the
JXM-IO-E30 expansion module. You have got several options to transfer the OS
file to the expansion module:
■
By means of the controller
■
By means of the command line tool JetEasyDownload (version 1.00.0.15 or
higher) from Jetter
OS update via JetEasyDownload
To update the operating system of this device, use a CAN dongle from PEAK and
the Jetter command line tool JetEasyDownload (version 1.00.0.15 or higher).
Required OS
version
Model type JXM-IO-E30-K00-O01 does not support OS file versions previous to
2.16.0.00. Any attempt to import an OS file version previous to 2.16.0.00, will
cause the following:
■
JetEasyDownload aborts with a timeout error.
■
The previous OS is deleted.
■
The device is waiting in bootloader mode for a valid OS file.
When the OS upload failed, reset the JXM-IO-E30-K00-O01. You can then repeat
the update attempt with an OS version ≥ 2.16.0.00.
JetEasyDownload
Parameters
To call JetEasyDownload you need specific parameters.
Parameter
Description
Values
-H<Num>
Hardware
0=
PCAN_ISA1CH
1=
PCAN_ISA2CH
2=
PCAN_PCI_1CH
3=
PCAN_PCI_2CH
4=
PCAN_PCC_1CH
5=
PCAN_PCC_2CH
6=
PCAN_USB_1CH
7=
PCAN_USB_2CH
8=
PCAN_Dongle Pro
9=
PCAN_Dongle
10=
PCAN_NET Jetter
11=
PCAN_DEV default device
20=
IXXAT V2.18
22=
IXXAT V3
100= CAN hardware detected first
-T<nodeID>
Target node ID
-B<Num>
Baud rate
Observe the per-
missible baud
rates of your de-
vice!
0=
10 kB
1=
20 kB
2=
50 kB
3=
100 kB
4=
125 kB
5=
250 kB
6=
500 kB
7=
1 MB