JETSURF ELECTRIC, User Manual

Page: 49 / 64

51
9. RIDING INSTRUCTIONS
9.9. JETSURF ELECTRIC CONTROL – STOPPING/FALLING
If the rider wants to stop, first he/she has to slow the JetSurf Electric down before reaching the
place of stopping. As soon as the rider is sufficiently close to the place of stopping, he/she will
release the throttle trigger. JetSur Electric will slow down and the rider can leave the board.
Warning (Risk of Accidents)
If you fall down, drop the throttle control handle immediately! It is necessary to pull the
engine shut-off key from the handle to stop the JetSurf Electric safely.
9.10. PERFORMANCE LIMITATIONS WHILE DRIVING
Performance limitations while driving may occur:
• if the battery is low
•
if the electric motor controller is overheated,
• if the electric motor is overheated
Note
The riding time is also influenced by the temperature of the water and the surrounding
area, so it is not possible to ride at full power without limitation.
9.11. SAFE RETURN
When the battery voltage falls below the level defining the safe return limit, the power is imme -
diately reduced so that the board can be pulled to the shore.
Info
Switching to “safe return” mode occurs while riding when the indicator is lit red.