PAGE 1 OF 4
0214 IH-4406
π
H-4406
ALUMINUM
BLEACHERS
3-ROW x 15'
1-800-295-5510
uline.com
WARNING! DO NOT ALLOW THESE
ALUMINUM BLEACHER COMPONENTS
TO GET WET! COMPONENTS THAT
ARE BUNDLED AND GET WET WILL
DISCOLOR!
NOTE: If components are to be stored
where they may be subjected to moisture,
break bundles and separate or restack
leg-to-leg so that components have
no flat surfaces touching together. This
will prevent chemical reaction which is
unsightly, but purely cosmetic.
NO CLAIMS WILL BE ALLOWED FOR SUCH
ALUMINUM DISCOLORATION.
CAUTION! All outdoor bleachers must be
anchored to meet wind loads as specified
by applicable building codes.
PARTS
Tape Measure
Square
Rubber Mallet
End Cap x 10
Socket Wrench
#8 x 1/2" Self-Tapping
Stainless Screw x 20
5/16" Carriage Bolt x 30
5/16" Flange Nut x 30
3/8" Bolt x 8
3/8" Flange Nut x 8
Frame x 3
X-Brace with End Notches x 2
X-Brace without End Notches x 2
Clip x 30
15' x 10" x 2" Anodized Seat Plank x 3
15' x 10" x 2" Mill Foot Plank x 2
TOOLS NEEDED
1/2" Deep Well
Socket
9/16" Deep Well
Socket
Electric Drill
with #2 Phillips Bit
9/16" Wrench
