JETSURF ELECTRIC, User Manual, Page: 37 / 64

39
8. BEFORE THE RIDE
• Grasp the opposite ends of the two rods
which are less distant from the clamp of the
stand and pull them apart.
• In the end turn the stand 180° so that the
ends of the bards
B
, covered with rubber
were oriented upwards.
Note
Make sure the stand is placed on a solid surface and that the motorised surf is placed
correctly on the stand. .
8.3. FINS
Every JetSurf Electric is supplied together with 3 (three) fins - 2 (two) small side ones and one
(1) big main one.
8.3.1. FASTENING OF SIDE (SMALL) FINS
• Insert the fin in the plug and place the front
tab of the fin inside the front slot of the plug
so that the hook in the fin tabs hits the hori -
zontal bar in the groove.
B
B
JE_0807
JE_0808
JE_0809