JETSURF ELECTRIC, User Manual

Page: 38 / 64

40
8. BEFORE THE RIDE
Info
The side fins have a flat surface on the inside and a convex foil on the outside. The
convex or curved side of the fin always points outwards.
• Then, lower the rear tab into the rear slot
of the plug until the mechanism engages
the tab.
• Check the tight fit, the fin should not move.
• Repeat this procedure for the second side fin.
Info
This mechanism will hold the fin in place until removal.
Warning (Risk of Accidents)
It is strongly recommended to use all fins under all circumstances. This ensures
maximum control of motorized surf.
8.3.2. THE SIDE FIN REMOVAL
• To remove the fin, grasp the fin and pull
upwards.
JE_0810
JE_0811