JETSURF ELECTRIC, User Manual, Page: 42 / 64

44
8. BEFORE THE RIDE
8.5.4. CHECK IF THE COOLING SYSTEM INLET AND OUTLET ARE CLEAN
During the ride it is very important that the heat produced by the motor, battery and regulator
is removed efficiently and there is no overheating.
• Before the ride therefore always check if the cooling system inlet
A
and outlet
B
are
clean.
Note (Material damage)
If the cooling system inlet / outlet are not clear, they have to be cleaned and the whole
cooling system has to be rinsed with fresh water ( p. 30 ) .
8.5.5. JET PUMP CHECK
• Before the ride, always check also the con -
dition of the jet pump.
Info
If they are dirty, it can influence the performance of JetSurf Electric.
JE_0820
B
A
JE_0818 JE_0819