5
MEASUREMENT OPERATION
5-228
TMPM5200-2
Z Axi
Chec
this b
Spee
Spec
Posit
This
eithe
e driving motor does not move any more.
Move
The driving motor works while this button is being pressed.
Start/Stop
Once you click the mouse on the Start button, the motor continuously works even if you
release th
Centre
The X a
r position automatically. This button is used
when you
Advanced (O
operate this)
Enter the calibration value of the Z-stage position. The calibration value is set before
factory
s Only
k this box when you do not use the X and Y motor drive. Use the instrument with
ox checked except when you use the ultra high vacuum SPM instrument.
d
ify the motor driving speed for each axis. Usually you use 4-Fast.
ion
indicates the X, Y and Z positions in each movement range. If the
△
mark is at the
r side of the end positions, th
e mouse button. To stop the motor, click on the Stop button.
nd Y motor drives return to the cente
exchange the specimen.
nly an administrator can
shipment.