5
MEASUREMENT OPERATION
5-212
TMPM5200-2
Continuously measured images are automatically stored in the selected folder.
3
appears. Enter the number of continuous
m
4.
C
Noise
Click
econ
aximum and mean values of the voltage. This
y when the Status Display window, which is also a signal
the AD converter, appears. During noise measurement, the scanner stays at
n the Status button in the Display Source frame of the SPM Parame-
ters window.
us window displays the result of noise measurement of the signals
specified in the Display Source signal input boxes.
measurement, click on the Abort button.
Paus
on this button, scanning is temporarily stopped and the tip stays at the
the Repeat or Single button. Scanning
n.
Abort
When you click on this button, scanning is stopped and the tip returns to the initial
position.
A serial measurement number is automatically attached to the filename.
Example: Filename test
→
test00.tif, test01.tif...
.
The Grab & Repeat dialog box
easurements (up to 99 measurements).
lick on the OK button.
Continuous measurement starts.
ing on this button measures the voltage input to the AC converter 5,000 times a
d, and displays the minimum, m
s
function is applicable onl
monitor of
the present position without performing measurement operations involving the scanner
movement.
The measurement procedure is as follows:
1.
Click o
The SPM Status window opens.
2.
Select a source signal to the AD converter from source signals 1 to 4 in the
Display Source frame.
3.
Click on the Noise button in the Scan frame of the SPM Parameters window.
The SPM Stat
4.
If you want to stop noise
e
When you click
present position. To restart scanning, click on
restarts from that positio