５
MEASUREMENT OPERATION
5-180
TMPM5200-2
The new scanning area appears in the Size and Offset boxes.
Drag
You
opera
durin
1.
I
the Display Window while pressing and
holdin
nter point of the scanning area will
shift
you dragged the mouse curser.
You c
peating this operation.
2.
To en
se button.
You cannot carry out this operation during scanning. Stop scanning by clicking on
the Abort button; then specify a new scanning area.
can shift the center point of the scanning area in the image to measure. This
tion is convenient when you wish to shift the field of view by a very small amount
g measurement.
f you move the mouse curser in
g down the left mouse button, the ce
by exactly the distance through which
an shift the field of view continuously by re
d this operation, click on the right mou
Shifting field
of view
The field of view shifts in real-time, so shift it slowly.
Enable Pre-Scan
If you have checked the left side check box, pre-scan will be performed before scanning
and the measurement-signal source gain and the offset value are adjusted automatically.
Concerning how to set the scan for pre-scan, refer to Pre-scan Setting in the SPM Setting
Menu.
Enable Lap Scan
If you have checked the left side check box, unidirectional scan from top to bottom in
ordinary mode will be changed to bi-directional scan from top to bottom in special mode.
Enable Gri
I
on th
when
d
f you have checked the left side check box, the four markers you can move will appear
e Display Window. The marker indicates the same coordinate point of each image
multiple images appear on the Display Window.
You can drag the position of the marker using the mouse.
