５
MEASUREMENT OPERATION
•
OS
oscillation frequency. The settable frequency range is 1 to 1000 kHz. The
ation waveform is a sine wave.
OS
•
OS
Check this box when you need a large voltage to oscillate the cantilever, as when
you observe the specimen in a liquid or when you use a cantilever that is hard to
oscillate. Output voltage range changes as follows:
OSC High Output
…
0 to 1.0
Ｖ
OSC High Output
…
0 to 10
Ｖ
•
Q Factor/Peak Frequency/kHz
The software carries out the frequency scan, detects the resonance frequency (peak
frequency) and Q factor, and displays their values.
•
Advanced
Click this button when you must set the resonance frequency of the cantilever
Clicking this
C Frequency/kHz
Enter an
oscill
•
C Output Amp/V
Enter a voltage to apply to the piezoelectric oscillator. The settable voltage range
changes according to the OSC High Output setting.
C High Output
manually, and open the Cantilever adjustment dialog that enables you to perform
more detailed settings.
For detailed operations, refer to the reference for the Cantilever adjustment button in
the Advanced operation mode.
Close
button closes the dialog.
5-198
TMPM5200-2
