Jensen A141 XL ZKX Operating Instructions Manual Download Page 23

Page: 23 / 128

1. Safety instructions

1.6 Woodchipper as trailer/implement

1. The operator is responsible for the correct attachment and use of the machine

especially when driving on public roads.

2. There is a

risk of injury

due to squeezing and shearing points when

connecting the machine to the tractor or towing vehicle!

3. Save the three-point linkage against accidental moving before connecting the

machine to the tractor.

4. When actuating the control levers for the three-point linkage never step

between tractor and implement!

5. No one is allowed to step between the tractor and the implement unless they

are secured against rolling away with park brake and/or wheel chocks! Only

connect the trailer/implement on the designated connectors!

6. Check the function of the braking system of the trailer!

7. Pay attention to the max. support load of the tow-bar!

8. Pay attention to the label when connecting hydraulic couplings to avoid faulty

operation due to inverted couplings (e.g. forwards/backwards, lifting/lowering)

accident hazard

9. Secure all moveable machine parts against dangerous moving by using the

designated attachments during transport!

10. Park trailer/implement in a stable and secured way!

Summary of Contents for A141 XL ZKX

































































































































Search results

Summary of Contents for A141 XL ZKX

Reviews:

Related manuals for A141 XL ZKX

Brands by name

Popular brands

Jensen A141 XL ZKX, Operating Instructions Manual

Search results

Summary of Contents for A141 XL ZKX

Reviews:

Related manuals for A141 XL ZKX

Brands by name

Popular brands