Jensen A141 XL ZKX, Operating Instructions Manual

Page: 96 / 128

Operating Manual HC 960
5/10 Vers. 1.2 © ehb Errors excepted
Y:\Vertrieb\01 Produkte\01 Produktinformationen Vertrieb\HC 960\Betriebsanleitung\HC 960_BA_V1.2_EN.docx
Bedienungsanleitung.doc
•
Stand/Version: 25.02.2005 /00
•
Layout: Gottschalk
•
\\Ehelec-nts-000\EHELEC\Iso 9001\Formblätter\Vorlagen
n, toggling between n and actual value Adjust your value
n, toggling between n and new value Normal speed
H, toggling between H and old value New value of n is accumulated
H, toggling between H and actual value Adjust your value
H, toggling between H and new value Maximum speed
ret, toggling between H and old value New value of H is accumulated
ret, toggling between H and actual value Adjust your value
ret, toggling between H and new value Return speed
IPU, toggling between IPU and old value New value of ret is accumulated
IPU, toggling between IPU and actual value Adjust your value
IPU, toggling between IPU and new value Pulses per revolution
Total operating hours New value of IPU is accumulated.
Programming is done
Table 1
If you do not push a button for a period longer than 60s the programming mode will be exited automati-
cally.
New values are accumulated after pushing the S-button
.
Programmed values keep accumulated even after power off !
7. Hourmeters
The HC 960 is equipped with two hour meters. During normal operation the speed is displayed. As soon
as the cutting wheel stops, the total operating hours are displayed. This is indicated by “th“ (total hours),
toggling between th and the actual value. By pushing the S-button once, the operating hours per day are
displayed. This is indicated by the word “day“, toggling between day and the actual value.
To reset the hour meter per day, please make sure the total operating hours are actually displayed. Now
push the S-button and keep it pushed until 00:00 appears in the display. The hour meter per day is reset.