Jensen A141 XL ZKX Operating Instructions Manual Download Page 47

Page: 47 / 128

5. Operation and maintenance devices

5.4. Optional infeed controls and safety functions

5.4.1. Touch keys (optional)

Infeed controls for machines with touch keys. Schematic display, differences in design and type possible.

5.4.1.1. Safety

bar

For machines with touch key the safety bar is only a safety function. The infeed stops

when the bar is pushed towards the infeed.

5.4.1.2.

Red touch key

Additional to the safety bar the infeed can be stopped by using the red touch keys

located on both sides of the infeed chute. To turn on the infeed again use the green

touch key.

5.4.1.3.

Green touch key

The first touch on the green touch key reverses the infeed. Touching the key again

puts the infeed to intake mode.

The first touch reverses the

infeed.

Touching the key again puts

the infeed to intake mode.

STOP

Summary of Contents for A141 XL ZKX

































































































































Search results

Summary of Contents for A141 XL ZKX

Reviews:

Related manuals for A141 XL ZKX

Brands by name

Popular brands

Jensen A141 XL ZKX, Operating Instructions Manual

Search results

Summary of Contents for A141 XL ZKX

Reviews:

Related manuals for A141 XL ZKX

Brands by name

Popular brands