Learning to Use the Lean Clean 360 Cleaning System
33
Using the Operator
Interface
This section of the user guide describes how to startup, operate, and
shutdown the Lean Clean and optional equipment:
General Considerations
Automatic Mode
In automatic mode, the Lean Clean operates automatically and in accordance
with the preset parameters in the program you have selected to run. Normally
you run the Lean Clean in automatic mode.
Manual Mode
In manual mode, you control the Lean Clean by using the operator interface
to start and stop pumps, change the position of the drain diverter, start and
stop heaters, and so on. Manual mode is useful for testing the system and to
recover from a power failure or malfunction, where you may have to manually
finish the cleaning cycle.
Modifying a Program
The Lean Clean 360 typically ships with either three default cleaning programs
or three customer-specified cleaning programs. Programs are normally labeled
Program 1, Program 2, and Program 3.
You can change process parameters in a program only when the system in
manual mode and when the washing chamber door is open. If the Lean Clean
is in automatic mode or running when you enter program changes, the
changes will not be accepted by the PLC.
Touch Screen Windows
Each screen you will use in operating and programming the Lean Clean is
described on the following pages.
