40
Learning to Use the Lean Clean 360 Cleaning System
Program Cycle Data Entry Window
When you want to change a program’s presets, us
e the
Program Cycle Data Entry
window. You can setup the program to use sonics or the rotator, set the
process temperatures, and set the cycle times for each step in the cleaning
cycle.
Programs can only be changed when between cleaning runs, when the
washing chamber door is open.
To change a cycle time or temperature set point, press the button
of the parameter you want to change and use the numeric window to change
the set point value as described on page 37.
Brings you to the next
Program Cycle Entry
Screen
Returns you to the
Main Message
window
These parameter buttons display
the current process parameter.
Pressing the parameter button
opens the numeric window
where you can change the
parameter set point
Pressing the wash and rinse
sonics buttons determines
wether or not the program uses
the sonics during washing and
rinsing
