Learning to Use the Lean Clean 360 Cleaning System
43
5.
You are now in the programming window for Program 1 by default.
(Note the program number at the top of the screen.)
6.
If you want to modify Program 2, press the
Next Part Program Screen
button. If your want to modify Program 3, press the
Next Part Program
Screen
button again.
7.
Once you have selected the program you want to modify, press the
button for the process parameter you want to modify. The numeric
window opens and displays the current value for the process
parameter you are modifying.
8.
Using the numeric window change the process parameter to the new
target value and press the
Enter
button.
9.
Modify any other process parameters you want by repeating steps 7
and 8.
10.
When you are done modifying the program process parameters, press
the
Main/Message Center
button.
11.
You are now back at the Main Message Center window and all
changes to the program are entered.
