Learning to Use the Lean Clean 360 Cleaning System
39
Motors, Pumps, Drains Window
The
Motors, Pumps, Drains
window is inactive in automatic mode except for the
Heat/Sonics/Rotator Set-up
button which opens the window that enables you to set-
up heat, sonics, and drains. The
Main/Message Center
button returns you to the
Main Message
window.
In manual mode, all the buttons are active and they enable you to control the
motors, pumps, and drains manually.
The pumps, blower
and rotator buttons
allow you to control the
equipment manually.
Theses buttons open
and close the washing
chamber drain valve
If you attempt to drain rinse
water into the wash solution
tank, or wash water into the
rinse tank, these warning
lights will illuminate. The
system will not allow you
to complete the action.
This row of buttons
indicates which
processes are still in
auto mode. (check?)
Returns you to
the
Main Message
Window.
Opens the control window
for the heating systems,
sonics, and rotator.
