Learning to Use the Lean Clean 360 Cleaning System
25
Figure 7. Main power connection to the Lean Clean
Compressed Air
Connect the compressed air source to the compressed air line at the top of
the Lean Clean using a ¼-inch connector.
Drain
Connect a drain line to the 1.5-inch PVC drain line union.
Water
Connect your water line to the fitting at the top of the cleaning machine using
a 1-inch NPT connector.
Warning
—
If you use a potable water line to supply water to the Lean Clean
system, rinse and wash water could siphon back into plant’s potable water system,
causing bodily injury through ingestion of contaminated water. To prevent bodily
injury through ingestion of contaminated water, connect the system to a process
water line and install a customer-supplied backflow preventor on the line to prevent
rinse and wash water from siphoning back into the plant’s process water line.
See the electrical schematic
supplied on the sy
stem’s CD ROM
for correct termination of wires on
main disconnect.
