38
Learning to Use the Lean Clean 360 Cleaning System
Options Window
The Options window lets you manually control the wash and rinse tank
heaters and the dryer heater. It also directs you to windows where you can
program process cycle times (
Program Cycle Data Entry
window) and view the
Motors, Pump, and Drain
window.
Pressing the
Program Cycle
Data Entry
button displays
the window where you can
changes process cycle
times. For example, you
could change the rinse
time from 150 seconds
to 120 seconds.
Using the On and Off buttons,
you can enable or disable the
tank and dryer heaters.
Returns you to
the
Main Message
Window.
Pressing the
Program Cycle
Status Display
return you to
process monitoring screen.
Pressing the
Pumps/Motors/Drains
button displays
the window where you can access the
Heat/Sonics/Rotator Set-up window.
