Print the initialized screen
Configuration menu
0. Exit to drawing editor
1. Show current configuration
2. Allow detailed configuration
3. Configure video display
4. Configure digitizer
5. Configure plotter
6. Configure system console
7. Configure operation parameters
6) Press
“
0
”
or
“
ENTER
”
to exit in here.
Enter selection <0>: 0
7) Keep configuration change? Y
<Drawing>
8) To get
“
0
”
point
Command: Rectang
Æ
Enter
First corner: 0,0
Æ
Enter
Other corner: 100,100
Æ
Enter
You make the rectangle box in here.
Now, there is an empty box in here.
Command: ZOOM
“
Enter
”
All/center/extend/: E
“
Enter
”
Command: dtext
“
enter
”
...<start point>: Click by mouse on the rectangular.
Height<10.0000>: 10
“
enter
”
Rotation angle<0>:0
“
enter
”
command: limits<--- Allows you to set the size of the marking letters and logos.
reset model space limits:
on/off/<lower left corner><0.0000,0.0000>: < ---
“
enter
”
Upper right corner<420.0000,297.0000>: < --100,100: Enter
”
In case of CAD file, if the rate 1:1,you can get the follows with the MK-100 machine.
Character height: CH: 100 =5mmH Y=Y:050
Character height: CH: 200 =10mmH Y=Y:050
Character height: CH: 300=15mmH Y=Y:050
PX:000(No need), Available X-values 000~070mm
37
