7. Pause: Stop of wait for next signal after one line marking finish
<ESC>SY; - Pause is set to
“
Y
”
.
<ESC>SN; - Pause is set to
“
N
”
.
8. Marking data: Input the data (Ex. This is a test)
<ESC>UThis is a test; -
“
This is a test.
”
Will be marked.
9. Select next block
<ESC>Z; - Block number will be incremented.
10. Set mark up to: Refer to F2
<ESC>$00000; - Set Mark_Up_To = 00000.
<ESC>$99999; - Set Mark_Up_To = 99999.
11. Set unit no: Refer to F2
<ESC>#00000; - Set unit no to 00000.
<ESC>#99999; - Set unit no to 99999.
12. Push reset button
<ESC>%;
13. Push start button
<ESC>!;
14. Push stop button
<CAN> or CTRL-X
A.
Getting Data from MK100->
To get data from the MK100, you must send a <ESC>? Sequence.
1.
Block type
PC --> MK100<ESC>?G;
PC <-- MK100<ESC>G1;
2.
Font select
PC --> MK100<ESC>?H;
PC <-- MK100<ESC>H0;
3.
Block data
PC --> MK100<ESC>?I;
PC <-- MK100<ESC>I000; MK100 sends back block X offset.
PC --> MK100<ESC>?J;
PC <-- MK100<ESC>J000; MK100 sends back block Y offset
PC --> MK100<ESC>?K;
32
