RS-232 PROTOCOL (Control the marking machine by serial communication)
For operating marking machine, you can use your own projecting program and standard program of
JEIL MTECH CO., LTD.
VERSION 1.0/VER2.0 of JEIL MTECH CO., LTD. standard program
(Writing/Creating your own operation software)
Data format
9600 baud
8 Data bits no parity bit,
1 stop bit, RTS/CTS control of data flow.
A. Sending data from PC ---> MK-100
Note: <ESC> means the control byte 0x1b.
<CAN> means the control byte 0x18 or CTRL-X.
(Communication Mode Commends)
1. Reset Memory
Do this first to ensure that any previous data is cleared and the current selected block is block00.
2. Function: Block type
Format: ASCII<ESC> G0; - Select ET block: Completion Block
<ESC>G1; - Select LN block: Linear marking
<ESC>G2; - Select CR block: ARC marking
<ESC>G3; - Select PL block: Plot file marking
<ESC>G4; - select CY block: Linear marking
3. Font select
<ESC>H0; - Select STD1 font: Standard 60%(
roman type
)
<ESC>H1; - Select STD2 font: Standard 60%(
Gothic type
)
<ESC>H2; - Select DOT font: 5X7 DOT type
<ESC>H3; - Select USR1 font: USER FONT
<ESC>H4; - Select USR2 font: USER FONT
<ESC>H5; - Select USR3 font: USER FONT
<ESC>H6; - Select USR4 font: USER FONT
4. Block Data
<ESC>I000; - Sets X Block offset to 000. (Marking start of X axis)
30
