F3화면: PLC SEQUENCE EDIT MODE (F3 key twice)
F1 : M_MENU F2 : A_MARK F3 : EDIT F4 : FILE
F5 : SETUP F6 : TEST F7 : LOAD F8 : COMM
SOOO // H / B000 /H / / /
SOO1 // H / B001 /H / / /
SOO2 // H / B002 /H / / /
SOO3 // H / B003 /H / / /
SOO4 // H / B004 /H / / /
SOO5 // H / B005 /H / / /
SOO6 // H / B006 /H / / /
SOO7 // H / B007 /H / / /
[SEQUENCE EDIT]
BLK_COPY : CTRL_C BLK_MOVE : UP/DOWN
CURSOR_MOVE : ENTER SELECT : SPACE_BAR
S000(Sequence block): A sequence block number (address) with the PLC code
B000 (): Programmed subordinate block of the sequence block. You can change the marking order you want.
H (HOME POSITION): Command of home. will return to home after marking
P (PAUSE RUN): Command of pause function
ex) If input the data like S001// B002 / B000 / B001 / H / / /
PLC signal marks 002 block and 000 block, and then marks 001 block. And last return to start point.
If press
“
B
”
, you can input the data and can see initialize B000 and can change the block number.
If press
“
H
”
(Zero point), it inputs immediately.
Check!
If you allows to use the PLC sequence function to the pressing
F5F5 and
Choose the PLC sequence table? (Y)
F4 (FILE) Screen: Block and sequence data, store and load of setup information.
If press
“
F4
”
on the keyboard, It is changed like this
“
MARKING DATE LOAD=>MARKING
DATA SAVE=>SEQUENCE FILE LOAD=>SEQUENCE FILE SAVE=>ALL SETUP LOAD=>ALL SETUP SAVE.
”
21
