Please read the following before executing the program
<FUNCTION Keys>
F1: M_MENU (Manual marking mode) indicated the function key of controller.
F2: A_MARK (Automatic marking mode)
Marking mode. Includes status window for the location and produced amount of the block data for the
Puncher.
F3: EDIT (Editing mode)
Edit the marking contents such as font, font size, letter space, Lot number, operation method, and
Direction of the letters.
F4: FILE (File mode)
Convert in order READ->WRITE->ERASE and store the data to S/D card.
F5: SETUP (Adjustment mode of parameter)
Control the speed of the marking pin and motor.
F6: TEST (Test mode)
This mode is to check for the condition of the marking machine and there`s function to store the time,
data, year, month and day.
F7: FONT (User font set up mode)
In that case you want to use another font except for basic font in controller, can be set up into User1~User4 each.
F8: COMM (Communication mode)
Control the operation of the marking machine with a PC.
F9: PREV
If press F9, can move the cursor previous.
F10: NEXT
If press F10, can move the cursor next.
For other keys, Enter key function is the same F10. After adjust the data, must always press the enter
and store. If press the Space bar on the Font and Type section, operation mode is converted.
Direction key is used during when input the data to F4 and move cursor.
When you mark some data, you have to it set F2 screen. When it is
“
READY
”
, you can mark.
9
However when you use AUTO CAD file on PC, you have to it set F8 comm. mode.
