F1 : M_MENU F2 : A_MARK F3 : EDIT F4 : FILE
F5 : SETUP F6 : TEST F7 : LOAD F8 : COMM
BLK NO. [ 000 ]
LN X : 0300 Y : 0300 A : 000
FNT : STD1 CH:030 PX:030 L:00000000 I:+1
<DATA> PAUSE : N
JEIL MTECH
[EDIT MODE]
BLK_COPY : CTRL_C BLK_MOVE : UP/DOWN
CURSOR_MOVE : ENTER SELECT : SPACE_BAR
BLK NO. [ 001 ]
EMT
< NO BLOCK DATA >
FONT: Select the letter type. (If press the SPACE BAR, Menu was changed.)
FONT: Select the letter type. (If press the SPACE BAR, Menu was changed.)
STD1 = Standard font, Normal type
STD1 = Standard font, Normal type
STD2 = Gothic style
STD2 = Gothic style
DOT = 5*7 DOT style
DOT = 5*7 DOT style
User1~User4 = To load user`s own font.
User1~User4 = To load user`s own font.
Plt1 = To load AUTO-CAD Files
“
LOGOS&DRAWING etc
”
.
Plt1 = To load AUTO-CAD Files
“
LOGOS&DRAWING etc
”
.
CH: Character size 1.0~8.0mm height
CH: Character size 1.0~8.0mm height
PX: Interval between the letter and letter
PX: Interval between the letter and letter
L: When user marks the serial number, first number to start.
L: When user marks the serial number, first number to start.
EX) (00000010) = First marking serial number is 10
EX) (00000010) = First marking serial number is 10
I: Creation increase and decrease of serial number.
I: Creation increase and decrease of serial number.
EX) I: +1 = As the above instance, second marking serial number is 11.
EX) I: +1 = As the above instance, second marking serial number is 11.
I: -1 = As the above instance, second marking serial number is 9.
I: -1 = As the above instance, second marking serial number is 9.
Ln: Select the marking type
Ln: Select the marking type
(Press SPACE BAR and change menu like the below)
(Press SPACE BAR and change menu like the below)
Ln: Linear marking.
Ln: Linear marking.
Cr: ARC marking
Cr: ARC marking
PLT: PLT file marking
PLT: PLT file marking
Cy: Marking on the cylindrical surface
Cy: Marking on the cylindrical surface
2D: Matrix bar code marking
2D: Matrix bar code marking
X: The width distance from start point to a lower of first letter.
X: The width distance from start point to a lower of first letter.
Y: The height distance from start point to a lower of first letter.
Y: The height distance from start point to a lower of first letter.
14
F1 : M_MENU F2 : A_MARK F3 : EDIT F4 : FILE
F5 : SETUP F6 : TEST F7 : LOAD F8 : COMM
BLK NO. [ 000 ]
LN X : 0300 Y : 0300 A : 000
FNT : STD1 CH:030 PX:030 L:00000000 I:+1
<DATA> PAUSE : N
JEIL MTECH
[EDIT MODE]
BLK_COPY : CTRL_C BLK_MOVE : UP/DOWN
CURSOR_MOVE : ENTER SELECT : SPACE_BAR
BLK NO. [ 001 ]
EMT
< NO BLOCK DATA >
14
