Center Planetary Gear Set
The annulus gear (10) is held against the housing
by the multiple-disc holding clutch B3 (5) via the
mechanical connection to the planetary carrier (15).
The sun gear (22) turns backwards due to the
engaged multiple-disc clutch K3 (12). The planetary
gears (18) turn on the fixed annulus gear (10) and
increase the torque from the sun gear (22) to the
planetary carrier (14). The output shaft (26) con-
nected to the planetary carrier (14) turns at a
reduced speed in the opposite direction to the run-
ning direction of the engine.
Fig. 14 Reverse Gear Powerflow - 4WD Low
1 - TORQUE CONVERTER LOCK-UP CLUTCH
14 - CENTER PLANETARY CARRIER
2 - TORQUE CONVERTER TURBINE
15 - REAR PLANETARY CARRIER
3 - TORQUE CONVERTER IMPELLER
16 - TORQUE CONVERTER STATOR
4 - HOLDING CLUTCH B1
17 - FRONT PLANETARY PINION GEARS
5 - HOLDING CLUTCH B3
18 - CENTER PLANETARY PINION GEARS
6 - HOLDING CLUTCH B2
19 - REAR PLANETARY PINION GEARS
7 - DRIVING CLUTCH K1
20 - FREEWHEELING CLUTCH F1
8 - FRONT PLANETARY ANNULUS GEAR
21 - FRONT PLANETARY SUN GEAR
9 - DRIVING CLUTCH K2
22 - CENTER PLANETARY SUN GEAR
10 - CENTER PLANETARY ANNULUS GEAR
23 - REAR PLANETARY SUN GEAR
11 - REAR PLANETARY ANNULUS GEAR
24 - FREEWHEELING CLUTCH F2
12 - DRIVING CLUTCH K3
25 - DRIVE SHAFT
13 - FRONT PLANETARY CARRIER
26 - OUTPUT SHAFT
A - ENGINE SPEED
D - SECOND GEAR RATIO
B - TRANSMISSION INPUT SPEED
E - FIXED PARTS
C - FIRST GEAR RATIO
WG
TRANSMISSION AND TRANSFER CASE
21a - 17
AUTOMATIC TRANSMISSION - W5J400 (Continued)