manualshive.com logo in svg

Jeep 200 Cherokee, Service Manual

Get ready to explore the vast capabilities of the Jeep 200 Cherokee with the comprehensive Service Manual! This invaluable manual equips you with step-by-step instructions and expert guidance for all your maintenance and repair needs. Download it for free from manualshive.com and unlock the true potential of your Jeep 200 Cherokee.

Share
Download
background image

DESCRIPTION

SPECIFICATIONS

Exhaust valve:
Opens . . . . . . . . . . . . . . . . . . . . . . . 66° B. B. D. C.
Closes . . . . . . . . . . . . . . . . . . . . . . . . 36° A. T. D. C.
Face angle:
Intake . . . . . . . . . . . . . . . . . . . . . . 55° 30

8

- 55° 40

8

Exhaust . . . . . . . . . . . . . . . . . . . . . 45° 25

8

- 45° 35

8

Head diameter:
Intake . . . . . . . . . . . . . . . . . . . . . . 40.05-40.25 mm
Exhaust . . . . . . . . . . . . . . . . . . . . . . . 33.8-34.0 mm
Head stand down:
Intake . . . . . . . . . . . . . . . . . . . . . . . . 1.08-1.34 mm
Exhaust . . . . . . . . . . . . . . . . . . . . . . . 0.99-1.25 mm
Stem diameter:
Intake . . . . . . . . . . . . . . . . . . . . . . 7.940-7.960 mm
Exhaust . . . . . . . . . . . . . . . . . . . . . 7.922-7.940 mm
Clearance in guide:
Intake . . . . . . . . . . . . . . . . . . . . . . 0.040-0.075 mm
Exhaust . . . . . . . . . . . . . . . . . . . . . 0.060-0.093 mm

Valve guide
Inside diameter . . . . . . . . . . . . . . . . . 8.0-8.015 mm
Fitted height . . . . . . . . . . . . . . . . . . . . 13.5-14 mm

Valve springs
Free length . . . . . . . . . . . . . . . . . . . . . . . 44.65 mm
Fitted length . . . . . . . . . . . . . . . . . . . . . . . 38.6 mm
Load at fitted length . . . . . . . . . . . . . 34 +/− 6% Kg
Load at top of lift . . . . . . . . . . . . . . . 92.5 +/- 4% Kg
Number of coils . . . . . . . . . . . . . . 5.33 Valve timing

Lubrication
System pressure at 4000 rev/min . 3.5 to 5.0 bar (oil

at 90-100°C)

Pressure relief valve opens . . . . . . . . . . . . 6.84 bar
Pressure relief valve spring - free length . 57.5 mm
Oil pump:
Outer rotor end float . . . . . . . . . . . 0.030-0.107 mm
Inner rotor end float . . . . . . . . . . . 0.030-0.107 mm
Outer rotor to body diam. clearance . . 0.130-0.230 mm
Rotor body to drive gear clearance

(pump not fitted) . . . . . . . . . . . . . . 0.30-0.50 mm

TORQUE SPECIFICATIONS

DESCRIPTION

TORQUE

Adaptor Plate to Block
Nuts (6) . . . . . . . . . . . . . . . . . . 27 N·m ( 20 ft. lbs.)
Automatic Belt Tensioner to Block
Bolts (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 N·m
Automatic Belt Tensioner to Mounting Bracket
Bolt (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 N·m
Generator belt
Tensioner . . . . . . . . . . . . . . . . . . . . . . . . . . 79 N·m
Generator bracket
Mounting bolts (6 mm) . . . . . . . . . . . . . . . . 10 N·m
Mounting bolts (8 mm) . . . . . . . . . . . . . . . 24.4 N·m

DESCRIPTION

TORQUE

Generator
Mounting bolt . . . . . . . . . . . . . . . . . . . . . . . 47 N·m
Camshaft thrust plate
Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 N·m
Connecting rod
Mounting bolt . . . . . . . . . . . . . . . . . . 29.5 N·m +60°
Crankshaft bearing
Carrier screw . . . . . . . . . . . . . . . . . . . . . . . 42 N·m
Crankshaft pulley
Locknut . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 N·m
Crossmember
Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 N·m
Diesel delivery
Union nut . . . . . . . . . . . . . . . . . . . . . . . . . 18.5 N·m
EGR valve
To intake manifold . . . . . . . . . . . . . . . . . . . 26 N·m
EGR tube
To EGR valve . . . . . . . . . . . . . . . . . . . . . . . 27 N·m
Engine mount—Front
Engine support bracket . . . . . . . . . . . . . . . . 61 N·m
Support Cushion . . . . . . . . . . . . . . . . . . . . . 47 N·m
Support cushion bracket bolts . . . . . . . . . . . 54 N·m
Support cushion bracket stud nuts . . . . . . . 41 N·m
Support Cushion through bolt . . . . . . . . . . . 65 N·m
Engine mount—Rear
Transmission support bracket . . . . . . . . . . . 46 N·m
Support Cushion nuts . . . . . . . . . . . . . . . . . 75 N·m
Support Cushion through bolt . . . . . . . . . . . 65 N·m
Exhaust down pipe
To turbocharger . . . . . . . . . . . . . . . . . . . . . . 22 N·m
Exhaust heat shield
Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 N·m
Exhaust manifold collar
Mounting nut . . . . . . . . . . . . . . . . 24.5 to 29.5 N·m
Exhaust manifold
Mounting nut . . . . . . . . . . . . . . . . . . . . . . 32.5 N·m
Fan drive
To fan hub . . . . . . . . . . . . . . . . . . . . . . . . . . 56 N·m
Flywheel
Lock bolt . . . . . . . . . . . . . . . . . . . . . . . 20 N·m +60°
Front timing cover
6 mm bolts . . . . . . . . . . . . . . . . . . . . . . . . . 10 N·m
8 mm bolts . . . . . . . . . . . . . . . . . . . . . . . . . 26 N·m
Fuel filter
Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 N·m
Glow plug
Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.0 N·m
Idler pulley bracket
Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 N·m
Idler pulley
Bolt (left hand thread) . . . . . . . . . . . . . . . . 47 N·m
Injection pump fuel lines
Nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 N·m

9 - 48

ENGINE

XJ

SPECIFICATIONS (Continued)

Summary of Contents for 200 Cherokee








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 200 Cherokee

Edelbrock Chevrolet 5783 Installation Instructions preview
Chevrolet 5783
Brand: Edelbrock Pages: 1
FORM FIT 1308 Installation Instructions preview
1308
Brand: FORM FIT Pages: 2
FAAFTECH FT-VF-HND2 Installation Manual preview
FT-VF-HND2
Brand: FAAFTECH Pages: 8
AutoMaxi AXIS XXL Instructions preview
AXIS XXL
Brand: AutoMaxi Pages: 2
Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG46 Manual preview
v.LOGiC Intelligent Solution V5-NTG46
Brand: Caraudio-Systems Pages: 18
BURY CC 9040 Specification preview
CC 9040
Brand: BURY Pages: 2
iOttie Aivo Connect Setup Manual preview
Aivo Connect
Brand: iOttie Pages: 58
Volvo 164 1969 Service Manual preview
164 1969
Brand: Volvo Pages: 266
Demco TP20047 Assembly Operation Replacement Parts preview
TP20047
Brand: Demco Pages: 4
Volvo S90 - ACCESSORY PANEL Owner'S Manual Supplement preview
S90 - ACCESSORY PANEL
Brand: Volvo Pages: 166
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82
Ferve F-2024 Operating Instructions Manual preview
F-2024
Brand: Ferve Pages: 28
Belkin F8J034 User Manual preview
F8J034
Brand: Belkin Pages: 30
Mitsubishi FTO Series Handbook preview
FTO Series
Brand: Mitsubishi Pages: 141
EUFAB 16559 Operating Instructions Manual preview
16559
Brand: EUFAB Pages: 12
DICE DCR-150 Installation Manual preview
DCR-150
Brand: DICE Pages: 1
Hudson Super-Six 1926 Instruction Book preview
Super-Six 1926
Brand: Hudson Pages: 24
ROLEC WallPod Series Installation Instructions preview
WallPod Series
Brand: ROLEC Pages: 2

Brands by name

Popular brands

Load more brands