Chapter 3 Ethernet Testing
Configuring layer 2 Ethernet tests
58
HST-3000 Ethernet Testing User’s Guide
4 Specify values for the following:
The instrument estimates the theoretical throughput, and
displays it in a table under the settings. The instrument
will not estimate throughput if it is configured to transmit
traffic with random frame sizes.
5 If you need to specify other settings for the test, use the
left and right arrow keys to go to the appropriate configu-
ration menu; otherwise, press the Home button to return
to the Summary Results screen.
The unit is configured to transmit a constant rate of traffic.
Setting
Parameters
Load Type
Constant
Load Unit
–
Bit Rate
–
Percent
Load (Mbps)
Enter the bandwidth to
transmit in Mbps.
Load (%)
Enter the bandwidth as a
percentage of the line
rate.
Summary of Contents for IP Video Test Option HST-3000
