JDS Uniphase IP Video Test Option HST-3000, User Manual

Page: 59 / 356

Chapter 1 Getting Started
Configuring your test
HST-3000 Ethernet Testing User’s Guide
37
– Chapter 5 “TCP/UDP Testing”
– Chapter 6 “Multiple Streams Testing”
Saving test
configurations
After you configure a test, you can save the configuration to
use as a template for future tests.
To save a test configuration
1 Configure a test (see “Configuring your test” on page 25 ).
2 Press the Save soft key, and then do one of the following:
– To create a new configuration, select Save Config,
type a name for the configuration using up to twenty
characters, and then select OK. You do not need to
enter a file extension.
– To overwrite an existing configuration, select
Overwrite Config, use the arrow keys to highlight the
configuration you want to overwrite, and then press
OK.
The configuration is saved.
Deleting test
configurations
You can delete test configuration at any time.
To delete a test configuration
1 Press the Save softkey, and then select Delete Config.
2 Use the arrow keys to highlight the configuration you want
to delete, and then press OK.
The configuration is deleted.
Loading a
configuration
You can load a saved configuration, and then use it as a
template for your current test. After loading the configuration,
you can change settings to meet your current requirements.