JDS Uniphase IP Video Test Option HST-3000, User Manual

Page: 130 / 356

Chapter 3 Ethernet Testing
MAC-in-MAC testing
108
HST-3000 Ethernet Testing User’s Guide
2 Go to the Customer Frame menu, and then specify
settings that characterize the customer frame. For
descriptions of each setting, refer to
“Specifying frame
characteristics” on page 51 .
3 If you need to specify other settings for the test, use the
left and right arrow keys to go to the appropriate configu-
ration menu; otherwise, press the Home button to return
to the Main screen.
The customer and backbone frame settings are specified.
B-Tag VLAN Enter the ID for the back-
bone VLAN used as the
path to the destination,
and the priority code point
(PCP) ID representing the
type of service the trans-
mitted traffic is emulating.
B-Tag DEI Bit Indicate whether the traffic
is drop eligible by setting
the DEI bit for the trans-
mitted traffic.
I-Tag Priority Enter the priority code
point (PCP) ID represent-
ing the type of service the
transmitted traffic is emu-
lating.
I-Tag DEI Bit Indicate whether the traffic
is drop eligible by setting
the DEI bit for the trans-
mitted traffic.
I-Tag UCA Bit Indicate whether you want
to use the customer
address by setting the bit.
I-Tag Service ID Specify the backbone ser-
vice instance ID for the
traffic.
Setting Parameters