JDS Uniphase IP Video Test Option HST-3000, User Manual

Page: 197 / 356

Chapter 5 TCP/UDP Testing
Configuring layer 4 traffic
HST-3000 Ethernet Testing User’s Guide
175
Filtering
received traffic
using layer 4
criteria
You can specify settings that determine which packets will
pass through the layer 4 receive filter and be analyzed and
reported in the test result categories. Traffic that does not
pass filter criteria is not reported in the test result categories
To specify layer 4 filter criteria
1 If you haven’t already done so, launch the IPv4 or IPv6
Terminate application for the circuit you are testing (see
“Launching an application” on page 28 ), and then select
the Layer 4 Traffic test (see “Selecting a layer 4 TCP/UDP
test” on page 165 ).
2 Press the Configure navigation key.
A configuration menu appears.
3 Do the following:
TIPS:
– If you want to use the JDSU Discovery feature to popu-
late the filter, be certain to Enable the filter.
– If you want to analyze all received traffic, verify that the
Ethernet Filter settings are all Don’t Care, and that the
IP and L4 filters are both Disabled.
– If you want to analyze only layer 4 traffic, be certain to
Enable the L4 filter.