![background image](http://html1.mh-extra.com/html/jcm-global/uba-rc-series/uba-rc-series_operation-and-maintenance-manual_3545425063.webp)
P/N 960-100928R_Rev. 3 {EDP #192692}
© 2018, JAPAN CASH MACHINE CO., LTD.
6 - 3
Performance Tests
UBA-RC™ Series Banknote Recycler
Section 6
JCM Tool Suite Standard Edition
When the “
JCM Tool Suite Standard Edition
” is
installed, the Short-cut Icon shown in Figure 6-10
will appear on the PC Desktop.
To activate the “
JCM Tool Suite Standard Edi-
tion
” Software Program, double-click on the Short-
cut Icon. The “
JCM Tool Suite Standard Edition
”
Screen shown in Figure 6-11 will appear on the PC
Monitor.
The
Device Information
list the Model Information whenever the
Device is connected to a PC.
The
Service Mode
Pull-down Menu shown in Fig-
contains several functional selections.
The selection items will appear depending on the
specific DIP Switches set to create them
.
Firmware Download Procedure
To download the UBA-RC
™
Firmware, proceed as
follows:
1. Copy
the
UBA-RC
™
Firmware File and paste it
on the PC Desktop. (Review Figure 6-1 “Tool and
Harness Connection” on page 6-1 to properly
select and set-up the Cable connections).
2. Turn
the
UBA-RC
™
Power Supply
OFF
.
3. Set
UBA
™
Transport Unit’s 8-Position DIP
Switches #6, #7 and #8 to
ON
a
).
4. Connect the UBA-RC
™
and the PC together using
the recommended USB Cable.
5. Turn the UBA-RC
™
Power Supply
ON
. The
UBA
™
Transport Unit LED will begin alternately
flashing at a
Green
and
Red
Color Rate, and the
UBA-RC
™
Status will revert to Stand-by Mode.
6. Launch the “
JCMToolSuiteStandardEdition.exe
”
Program.
7. When
the
“
JCM Tool Suite Standard Edition
”
Screen shown in Figure 6-14 appears, click on the
Service Mode Pull-down Menu and select “
Down-
load
a
).
8. The
“
JCM Downloader Suite Edition Ver X.XX
”
Program will activate automatically.
9. When
the
communication line between the UBA-
RC
™
and the PC is connected, “
Online
” will
appear in
Green
Text (Figure 6-16
a
) below the
Download Screen Button.
Click on the “
Browse
”
Screen
Button (Figure 6-16
b
).
Figure 6-10
Figure 6-10
JCM Tool Suite Short-cut Icon
Figure 6-11
JCM Tool Suite Standard Edition
Figure 6-11
JCM Tool Suite Standard Edition
a
b
NOTE: Service Mode Pull-down Menu listings will depend on
DIP Switch Setting selections.
Figure 6-12
Figure 6-12
UBA-RC DIP Switch Setting
Figure 6-13
Figure 6-13
DIP Switch Location
a
Figure 6-14
Figure 6-14
Select Download
a
NOTE: When the download program
is activated for the first time, an
“Invalid File!” message pop-up
Dialog Box (Figure 6-15) will appear
because the Firmware File has not
yet been selected. Click on the
Dialog’s “
OK
” Screen Button (Figure
a
), and select the proper
Firmware File. Once the Firmware
File is selected, the message will no
longer appear again.
Figure 6-15
Invalid File! Dialog Pop-Up Screen
Figure 6-15
Invalid File! Dialog Pop-Up Screen
a