![background image](http://html1.mh-extra.com/html/jcm-global/uba-rc-series/uba-rc-series_operation-and-maintenance-manual_3545425039.webp)
P/N 960-100928R_Rev. 3 {EDP #192692}
© 2018, JAPAN CASH MACHINE CO., LTD.
2 - 1 5
Installation
UBA-RC™ Series Banknote Recycler
Section 2
Operational
Flowcharts (Continued 4)
Figure 2-18 depicts a typical a UBA-RC
™
Cash Box Stacking flow process.
Figure 2-18
C2) Return from the Figure 2-15 “Validation” Flow on
page 2-12 of this Service Manual
b) Is the Banknote being sent to the Cash Box?
c) Was transportation tried three (3) time?
f) Stop performance; sending an Abnormal Oper-
ation Signal (*2)
g) Sending Acceptance VEND Signal
h) Stacking the Banknote
i) Is the Cash Box full?
a) Sending the Banknote to the Cash Box
d) Rotate the Anti-Pullback (PB) Unit
j) Sending a FULL Signal (*4)
A) Return to Figure 2-14 “Primary Sequence” Flow
on page 2-11 of this Service Manual
e) Was an Abnormal Error detected by the PB Unit?
*2). When an Abnormal Signal is received, remove power, resolve the problem, and re-apply Power to the UBA-RC; or send
a RESET Command from the Host Machine to the UBA-RC.
*4). When a “Cash Box Full” Signal is received, retrieve the Banknotes from the Cash Box and re-seat the Cash Box back into
the Unit. The UBA-RC will automatically perform its re-initialization movement operation.
a
A
C2
YES
NO
b
c
c
f
e
g
h
i
j
NO
YES
NO
YES
YES
NO
Figure 2-18
UBA-RC Operational Flowchart (Stacking/Cash Box)