P/N 960-100928R_Rev. 3 {EDP #192692}
© 2018, JAPAN CASH MACHINE CO., LTD.
1 - 5
General Information
UBA-RC™ Series Banknote Recycler
Section 1
Component Names
Figure 1-5 illustrates the UBA-RC
™
component names and locations.
Figure 1-5
Figure 1-5
UBA-RC Component Names
A
B
E
G
H
I
L
M
D
F
N
J
K
1
2
3
5
4
C
: Front Panel Access Door
NOTE: The Front Panel Access Door
should NOT BE LEFT OPEN when the
UBA-RC Bin Assembly is re-installed
into the Frame.
Recycler Unit Assembly
Rear Side
Front Side
Optional Lock
O
U
P
Q
R
T
C
S
V
NOTE: The Optional Lock is available
for installation on the right or left side
of a UBA-RC Unit.
A.UBA Transport Unit
(User Supplied)
B.UBA Unit Upper Guide Access Lever
C.Front Panel Access
1.USB mini-B Type Receptacle
(for performing
Software downloads and adjustments)
2.8 Position DIP Switch Block
3.UBA
Transport Unit LEDs
(Green & Red)
4.Front Bezel Receptacle
(for the Optional Bezel
Assembly Plug)
5.Centering LED
6.Transport Unit Release Lever
D.RC Unit DIP Switch Block
E.RC Unit LEDs
(Green, Red & Yellow)
F. Recycler Unit Release Pushbutton
G.Restore Pushbutton
(for moving Banknotes from the
Recycler Unit into the Cash Box)
H.Recycler Unit Lock
(Supplied with Key)
I. Recycler Unit
J. Cash Box Lock Holes
(Locks are User Supplied
Options)
K.Cash Box
L. Bezel Accessory
(One of 3 Options Available)
M.Bezel Spacer
N.Centering Guide Release Port
O.Interface Connector
(Connects to the Host Machine)
P. Housing Frame
Q.RC1-Bin Assembly Banknote Space
R.RC2-Bin Assembly Banknote Space
S.Banknote Width Guide
T. Banknote Length Guide
U.Power Connector
V. Optional Lock Unit
(Right or Left side)