P/N 960-100928R_Rev. 3 {EDP #192692}
© 2018, JAPAN CASH MACHINE CO., LTD.
6 - 1
S e c t i o n 6
This section provides Calibration and Performance
Testing instructions for the UBA-RC
™
Series
Banknote Recycler (UBA-10/12-SH2/SS-RC;
UBA-RC
™
) Unit and contains the following
information:
•
Download and Installation Workbench
Tool Requirements
•
JCM Tool Suite Standard Edition Installation
•
Firmware Download Procedure
•
When to Calibrate
•
Calibration Tool Requirements
•
UBA-RC Reference Paper
•
Calibration and Testing Program
•
Individual Calibration and Performance Test
•
Performance Test without PC
•
Extended Function
Download and Installation
Workbench Tool Requirements
Figure 6-1 illustrates and identifies the tools and
equipment interconnects necessary to download
and install a UBA-RC
™
Recycler.
JCM Tool Suite Standard
Edition Installation
Perform the following steps to install the
JCM Tool
Suite Standard Edition
(Refer to Figure 6-1 for the
necessary Tool Requirements and Harness
Connector locations). The Driver and Tools
required for the UBA-RC
™
Calibration are installed
on the PC once the
JCMToolSuiteStandardEdi-
tion.exe
file is installed.
To install the
JCMToolSuiteStandardEdition.exe
file, proceed as follows:
1. Copy
the
JCMToolSuiteStandardEdition.zip
File
and paste it in a related Folder on the PC desktop.
2. Extract
the
JCMToolSuiteStandardEdition.zip
Files and Double-Click on the
setup.exe
Appli-
cation in the extracted Folder (Figure 6-2
a
).
3. The
JCM Tool Suite Standard Edition Install
Shield Wizard
Screen shown in Figure 6-3 will
appear.
4. Click on the “
Next>
”
Screen
Button (Figure 6-3
a
) to begin installing the
JCM
Tool Suite Standard Edition Program
.
6 PERFORMANCE TESTS
Figure 6-1
Figure 6-1
Tool and Harness Connection
a) UBA-RC Recycler with UBA Transport Unit
(User
supplied)
b) Power Supply
c) PC (OS: Windows XP or later)
d) USB Cable
d-1) USB “A” Terminal Plug
d-2) USB “B” Terminal Plug
e) JCM Tool Suite
f) UBA-RC Firmware
g) Reference Paper (KS-087)
a
d-1
d-2
e & f
c
b
g
Figure 6-2
Figure 6-2
setup.exe Location
a
Figure 6-3
Figure 6-3
Install Shield Wizard Screen
a