![background image](http://html1.mh-extra.com/html/jcm-global/uba-rc-series/uba-rc-series_operation-and-maintenance-manual_3545425124.webp)
P/N 960-100928R_Rev. 3 {EDP #192692}
© 2018, JAPAN CASH MACHINE CO., LTD.
A - 2
Appendix A
UBA-RC™ Series Banknote Recycler
Troubleshooting
Lit
Flashes 8 times
Communication Error occurred between the UBA
™
Transport Unit and the RC Unit.
Flashes 9 times
RC Unit Software download failure.
Flashes 10 times
Detected abnormal Banknote position during transportation.
Flashes 12 times
Detected abnormal condition on the transport path.
Flashes 14 times
Abnormal movement occurred in the
UBA
™
Transport Unit
Flashes 15 times
Detected abnormal settings of the recyclable Banknote denomination.
Extinguished (Out)
Flashes 1 times
Detected banknote full while stacking the banknotes.
Flashes 2 times
Detected that the Pusher Mechanism has not moved from/to the Home Position
while
stacking the banknotes.
Flashes 3 times
Detected banknote transportation error within the Cash Box. The Sensor is not
detected after passing regulation time or transportation amount.
Flashes 4 times
Detected banknote transportation error while transporting/rejecting the banknotes.
The Sensor is not detected after passing regulation time or transportation amount.
Flashes 5 times
The Feed Motor pulse pitches are less than the rated value while initializing.
Flashes 6 times
When the Feed Motor is running, the rated value is not detected at the proper time.
Flashes 7 times
When the Stacker Motor is running, the rated value is not detected at the proper
time.
Flashes 8 times
EEPROM is not read or written.
Flashes 9 times
PB (Pull-Back) Unit is not working properly.
Flashes 10 times
Detected the Cash Box is detached.
Flashes 12 times
The Sensor timing is abnormal.
Flashes 13 times
Detected that the Intake Roller malfunctioned while transporting/rejecting the
banknotes.
Flashes 14 times
Detected that the Centering Guide is not moving.
Synchronized Flashing Sets of both
Red
and
Green
LEDs
Downloading of RC Unit Software.
Table A-2
RC Unit LED Color Type Error Code Conditions
Color
Error Causes
Red
Error occurred before sending a Vend Signal while storing the banknotes or after sending a Pay Valid
Signal while dispensing the banknotes.
Yellow
Error occurred after sending a Vend Signal while storing the banknotes or before sending a Pay Valid
Signal.
Green
Error occurred other than during a storing or dispensing condition.
Table A-1
UBA Unit LED Code Conditions
Green LED
Red LED
Error Causes