JC BORDELET EVA992GAZ, Instructions For Installation, Maintenance And Use

Page: 10 / 26

Composition of the log set:
Decorative embers placed on the burner must be piled to
avoid clogging the flame holes. All flame holes must be
covered by decorative embers
The solenoid valve block and the power cord are behind the
base trapdoor.
The gas pipe must be purged before proceeding to the
connection.
The installation of the gas supply must be done by a qualified
professional and the gas system must be compliant with
decree of 23 February 2018 and with standard NF DTU 61.1
P1 to 7.
Accesses to all fittings and to the reset button must be
maintained after installation in order to make operations
easier.
The solenoid valve is equipped with a pressure port to which
a pressure gauge can be connected. The burner pressure
must be checked during commissioning. Please refer to the
technical characteristics provided at the beginning of these
instructions.
Warning: This appliance is pre-set and sealed at the factory.
These settings must not be changed.
PLACEMENT OF DECORATIVE ELEMENTS
Decorative logs are fragile and must be handled with care.
The assembly plan for the embers and ceramic logs must be
respected or the performance and appearance of the flames
may be impacted.
The electrode must not have logs on it, or be oriented
differently or moved. This may cause a safety shutdown or
prevent ignition.
By default, the appliance comes with the following items:
- 2 sets of 6 ceramic logs
- 4 bags of embers
Electrovanne
Gas connection
½’’
Reset button
Electrode port
Measurement point for
burner and gas
pressures
Lo
g 1
(
x2
)
Lo
g 2
(
x2
)
Lo
g 3
(
x2
)
Lo
g 4
(
x2
)
Lo
g 5
(
x2
)
Log 6 (x2)
INSTALLATION OF THE APPLIANCE
1. INSTALLATION INSTRUCTIONS