R-CCx
R-CDx
Read - Counter
Sleep + port
Read - Counter
port
To get the Counter value of “Sleep Cycles”, means the
number of times the tool went into Sleep Mode.
The ‘x’ must be replaced with the number of the
destination port in ACCII, for example “RCC1”.
The JBC device responds with an “ACCx”
The Data field contains the number of times the tool
went into Sleep Mode.
To get the Counter value of “Desoldering Cycles”,
means the number of times the desoldering tool has
been activated.
The ‘x’ must be replaced with the number of the
destination port in ACCII, for example “RCC1”.
The JBC device responds with an “A-CDx”.
The Data field contains the number of times the
desoldering tool has been activated.
Code
Description
Details
W-NVS
Write - Non-volatile
Setting
To save the work temperature selected with W-STx, in
the EEPROM memory.
The next time the JBC Device starts, this stored
temperature will be loaded.
The data field must contains “00000”.
The JBC device responds with an “A-NVS”.
W-SAD
Write new source
address / new
addressing mode
Forces the station to write a new source address by
filling the data field with a value compressed between
“00000” and “00099”.
If the data field contains “00000”, the station assumes
that the protocol is changed to “with-no-address”
mode.
Warning: Command only available for UCR
stations.
24