Janome AT2000D, Instruction Book

Page: 17 / 65

14
Position of Thread Guide Bar
Pull the thread guide bar up as far as it will go.
q
Thread guide bar
Turn the thread guide bar until it snaps into place.
Be sure to snap both stoppers into places.
The thread guide bar is placed right above the spool pins
as shown.
w
Thread guide
e
Stopper
r
Spool pin
Attaching the Spool Holder Cap and Net
When you use a small thread spool, pull out the spool
holder from the spool pin.
Place the spool with its slit side up, and put the spool
holder cap on top of it.
q
Spool holder
w
Spool pin
e
Spool holder cap
If the thread slips down from the spool during threading
and/or sewing, put a net on the spool as illustrated to
prevent jamming.
r
Net
q
w
e
r
q
w
e
q
r
t
* Firmly insert the spool holder into the spool.
q
Spool holder
t
Spool