Janome AT2000D, Instruction Book

Page: 11 / 65

8
Handwheel
Match the “ ” mark of the belt cover with the “–” mark
of the handwheel when threading needles, adjusting
the chaining finger switch knob or raising/lowering the
spreader.
Always turn the handwheel toward you
(counterclockwise).
q
Handwheel
w
Belt cover
e
“ ” mark
r
“–” mark
Looper Cover
To open:
Hold the looper cover as illustrated and slide it to the right
as far as it will go.
Pull the looper cover toward you to open it.
q
Looper cover
To close:
Push the looper cover back up. The looper cover snaps
into position automatically.
Side Cover
To open:
Pull the side cover to the left.
q
Side cover
To close:
Push the side cover to the right.
q
q
q
w
e
r
NOTE:
Always close the looper cover when the machine is
in use. You cannot run the machine with the looper
cover open.
NOTE:
Always close the side cover when the machine is in
use. You cannot run the machine with the side cover
open.