Janome AT2000D, Instruction Book

Page: 10 / 65

7
GETTING READY TO SEW
Connecting the Power Supply
WARNING
While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts
such as the thread take-up lever, handwheel, knives,
loopers or needles.
Always turn off the power switch and unplug the
machine from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control.
Turn the power switch off.
Insert the machine plug into the machine socket.
Insert the power supply plug into the wall outlet.
Turn the power switch on.
q
Power switch
w
Machine plug
e
Machine socket
r
Power supply plug
t
Wall outlet
y
Foot control
Before Using Your Machine
Before using your machine for the first time, place
a scrap of fabric under the presser foot and run the
machine without thread for a few minutes. Wipe away any
oil which may appear.
Operating Instructions:
The symbol “O” on the switch indicates the “off” position
of the switch.
Foot control model YC-482-J-1 (U.S.A and Canada only)
is used with this machine.
For the U.S.A. and Canada only:
For appliances with a polarized plug (one blade wider
than the other): To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If
it still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
Controlling Sewing Speed
Depress the foot control to start the machine.
The further down you press on the foot control, the faster
the machine runs.
q
Foot control
w
e
q
r
t
y
q