janitza UMG 806, User Manual And Technical Data

Page: 86 / 92

86
UMG 806 www.janitza.com
16. Technical data
16.1 Technical data, UMG 806
Transport and storage
The following specifications apply for devices transported and stored in the original packaging.
Free fall 1 m (39.37 in)
Temperature -30° C (-17.2 °F) to +80° C (176 °F)
Relative humidity 5 to 95 % RH at 77 °F (25 °C), non-condensing
Environmental conditions during operation
The device:
• For weather-protected and stationary use.
• Fulfills operating conditions according to DIN IEC 60721-3-3.
• Has protection class II according to IEC 60536 (VDE 0106, part 1), a ground wire connection is not required!
Rated temperature range -25 °C (-13 °F) to +70 °C (158 °F)
Relative humidity 5 to 95 % at 77 °F (25 °C), non-condensing
Operating elevation/overvoltage category
< 2500 m (8200 ft) above sea level
Pollution degree 2
Ventilation No forced ventilation required.
Protection against foreign matter and water IP20 according to EN60529
Supply voltage
Nominal range AC/DC: 80 V - 270 V
Operating range +/-10% of nominal range
Power consumption max. 7 VA
Recommended overcurrent
protective device for line protection
5 A, (type B), IEC/UL approval
General
Net weight 300 g (0.66 lb)
Device dimensions
Approx. B = 90 mm (3.54 in), H = 90 mm (3.54 in),
D = 63.5 mm (2.5 in)
Battery Type Li-Mn CR2032, 3 V
Backlight service life 45000 h (50% of the initial brightness)
Mounting orientation As desired
Impact resistance IK04 according to IEC 62262