janitza UMG 806, User Manual And Technical Data

Page: 44 / 92

44
UMG 806 www.janitza.com
9.5 Overview of measuring display (display mode)
The measurement device measures electrical quantities such as voltage, current, power, power factor,
frequency, energy, harmonics, asymmetries or extreme values. Some of these electrical quantities can
only be read out via the communication interface. More detailed information can be found in the Modbus
address list.
Measured values
Voltage L-N
Voltage L-L
Current 1-3
Current I
N
Current I4
Frequency
Active power
Reactive power
Apparent power
Active power, total
Reactive power, total
Apparent power, total
Power factor
Power factor, total
Current I5 (mA)
Temperature
Energy values
Active energy (+), applied
Active energy (-), delivered
Reactive energy (+), applied
Reactive energy (-), delivered
Total harmonic distortion THD UA (L1)
THDA UA (L1) - average value
THD UA (L1) - 2nd harmonic
THD UA (L1) - 31st harmonic
Total harmonic distortion THD UB (L2)
THDA UB (L2) - average value
THD UB (L2) - 2nd harmonic
THD UB (L2) - 31st harmonic
Total harmonic distortion THD UC (L3)
THDA UC (L3) - average value
THD UC (L3) - 2nd harmonic
THD UC (L3) - 31st harmonic
Measuring display (display mode)
* Display for corresponding, coupled expansion modules
INFORMATION
Coupled and activated extension modules change
or enhance the measuring display.
Total harmonic distortion THD IA (L1)
THDA IA (L1) - average value
THD IA (L1) - 2nd harmonic
THD IA (L1) - 31st harmonic
Total harmonic distortion THD IB (L2)
THDA IB (L2) - average value
THD IB (L2) - 2nd harmonic
THD IB (L2) - 31st harmonic
Total harmonic distortion THD IC (L3)
THDA IC (L3) - average value
THD IC (L3) - 2nd harmonic
THD IC (L3) - 31st harmonic
Time display
Active module EI1 measured values*
Analog input 1
Analog input 2
Analog input 3
Analog input 4
Relay outputs (RO1 and RO2)
Active module ED1 measured values*
Digital inputs 1-4
Relay outputs (RO1 and RO2)